Dimplex DWF1215B Manuel du propriétaire télécharger pdf (Page 10)

10 www.dimplex.com

while turning the anchor

clockwise until it is ush with

the wall.

9. Insert the wall anchor screws

through the wall bracket and

thread into the wall anchors.

Tighten the screw (Figure 3).

10. Install the remaining screws

through the bracket and into

the wall studs as required.

!

NOTE: At least two of

the mounting screws must be

installed into a wall stud.

11. Remove the two (2) cover

C.

3. Hold the wall-mounting

bracket on the wall and mark

the location of ONE (1) of the

mounting holes.

4. Place the bubble level onto

the top of the wall-mounting

bracket.

5. Adjust the wall-mounting

bracket so the bubble on the

level is centered between the

two black lines.

6. Mark three (3) other mounting

screw locations, on the wall,

ensuring that the wall bracket

stays level.

7. Install the supplied wall

anchors on the drywall

marked locations by placing

a #2 Phillips screwdriver into

the recess of the anchor.

8. Press the anchor into the wall

in the desired marked position

Fireplace Installation

Figure 5

Wall anchor

Screw

Wall

bracket

Figure 4

Figure 6

Cover Plates

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Commentaires sur ces manuels

Pas de commentaire