Dimplex LVA232 Instructions d'exploitation télécharger pdf (Page 4)

Living Art Range

Model(s): LVA231 & LVA232

IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Important Safety Advice

When using electrical appliances, basic precautions

should be followed to reduce the risk of fire, electric

shock, and injury to persons, including the following:

If the appliance is damaged, check immediately with

the supplier before installation and operation.

Do not use this appliance in the immediate

surroundings of a bath, shower or swimming pool.

Do not use outdoors.

Do not cover or obstruct the appliance in any way.

Overheating will result if it is accidentally covered.

In the event of a fault switch off the appliance.

Switch off the appliance when not required for long

periods.

This appliance is not intended for use by children or

other persons without assistance or supervision if

their physical, sensory or mental capabilities prevent

them from using it safely. Children should be

supervised to ensure that they do not play with the

appliance.

If the supply cord is damaged it must be replaced by

the manufacturer or service agent or similarly qualified

person in order to avoid a hazard.

Electrical

WARNING – THIS APPLIANCE MUST BE EARTHED

This appliance must be used on an AC ~ supply only and the

voltage marked on the appliance must correspond to the

supply voltage.

Do not switch the appliance on until properly installed. Please

read all the safety warnings and operating instructions.

General

Unpack the appliance carefully and retain the packaging for

possible future use, in the event of moving or returning the

appliance to your supplier.

Contents of Carton

• Living Art Range Model

• Wall fixing plate (attached to chassis for transit)

• Fixing screws and wall plugs

• Remote control and batteries (AAA type)

• Cable and plug

Do not connect the appliance to an electricity supply until it is

installed on a wall correctly - see ‘Installation’.

The appliance can be operated remotely or manually - see

‘Operation’.

General features of the remote control are:

• Selection of 8 different scenes.

• Sound effects relevant to your selected scene may be

activated and the volume increased or decreased.

• Switch off to Standby.

Installation

Do not connect appliance until properly fixed to the wall

and the Instruction leaflet is read fully.

For installation of the appliance, care must be taken not to

damage any cables that may be concealed in the wall.

Please be careful while drilling the holes.

These models are designed to be permanently wall mounted

- see Fig. 1 for recommended fixing dimensions from floor to

underside of the appliance for optimum viewing of the display

screen. The outline of the chassis and the position of the

electrical socket are shown as dotted outlines in Fig. 1. Any

dimensions indicated

‘*’

are recommended dimensions.

The wall plate is secured to the chassis with 2 screws (see

detail view ‘X’ in Fig. 4). To wall mount the appliance first

remove the wall plate from the chassis by removing the two

screws and rotating the corner hinges away from the chassis.

Note : Retain the two screws for future use.

Fix the wall plate to the wall using the wall plugs and screws

provided. (Note: Ensure that the wall is suitable for the screws

& plugs provided).

Use the wall plate as a template to mark the hole positions for

drilling - see Fig. 2. Drill and fix the wall plate in position with

one screw initially to check the plate is level before marking

and drilling the remaining holes - see ‘1’ in Fig. 3. Ensure the

wall plate is fitted the correct way up i.e. the side hooks are

pointed upwards - see Fig. 3.

The appliance can then be fitted to the wall plate by aligning

the slots on the chassis with the side hooks on the wall plate.

This is best achieved by positioning the appliance vertically

above the plate (see ‘2’ in Fig. 3) and locating on the side

hooks and sliding the chassis downwards (see ‘3’ in Fig. 3).

The corner hinges on the wall plate may be used to secure

the appliance against inadvertent dislodgement. Simply rotate

the hinges upwards (see Fig. 2 and detail view in Fig. 3) to a

position above the chassis. They can then be screw fixed using

the screws removed earlier (see detail view ‘X’ in Fig. 4 of

corner hinge rotated up and screw fixed in position).

The appliance should not be connected until the instruction

leaflet is read fully.

NOTE: The appliance should be ‘HARD’ wired to a fused

switched spur located behind the glass screen so as to be

hidden from view - see ‘d‘ in Fig. 1. The cable should be

shortened as necessary in order to remain concealed behind

the glass display screen.

Please consult a qualified electrician for appropriate wiring

requirements.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Dimplex LVA232 Instructions d'exploitation Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Foyers Dimplex LVA232