Dimplex SCxn175d Instructions d'exploitation télécharger pdf (Page 14)

Unvented hot water cylinder – SCxn…d/i, SCxn…sd/si

Page 13 of 28

ST0109 – C 05/09

WATER

Note: The cylinder must be filled with water before switching on the immersion

heater. Failure to do so will damage the element and void any guarantee on the

product.

5.6 Indirect heating loop

The indirect heating source can be connected to the cylinder in various ways as de-

scribed by the chosen control system supplier. The wiring and installation principles for

two typical integration methods are detailed in chapter 5.11.

Figure 8 – indirect heating loop installation

To conform with building regulations it is imperative that the motorised two port valve

is installed in the indirect heating loop and connected into the control circuit as required.

SCxn…i

SCxn…si

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

Pas de commentaire

Dimplex SCxn175d Instructions d'exploitation Page 14