Dimplex BLF34 Manuel de service télécharger pdf (Page 9)

ing the screws to prevent the unit from falling.

3. Remove the replace out of the opening by slightly lift-

ing and pulling forward.

4. Carefully lay the unit down on a solid at surface with

the front of the unit facing up.

NOTE: If the surface you are using as a work area is a

nished surface that is prone to scratches (i.e. hardwood

ooring), it is recommended that a protective barrier be

used underneath, (i.e. cloth, cardboard, thick plastic).

5. Proceed to the instructions within this manual relating

to the repair being performed - see Table of Contents

for page number.

6. Once repair is complete, reassemble in the reverse

order as above.

ON/OFF SWITCH REPLACEMENT

WARNING: Disconnect power before attempting any

maintenance or cleaning to reduce the risk of electric

shock or damage to persons.

CAUTION: If unit was operating prior to servicing allow

at least 10 minutes for lights and heating elements to cool

off to avoid accidental burning of skin.

Tools required: Phillips head screwdriver.

Needle nosed pliers.

CAUTION: Follow “Preparation for Service” instructions

before proceeding.

1. Remove the 2 screws, that secure the controls assem-

bly (Figure 9), located at the top of the mirror on the

right side of the unit.

2. Slide the controls assembly out toward the front of the

unit.

CAUTION: Ensure that the assembly is removed care-

fully, ensuring that no wires are caught or over strained.

Wall Surface

Mounting Hole

Figure 8

Mounting hole

Mounting

holes

Figure 7

Figure 10

Remote

Receiver

LED

Driver Board

Switch

Board

On/Off

Switch

Figure 9

Retaining Screws

Controls Assembly

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Dimplex BLF34 Manuel de service Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Foyers Dimplex BLF34